Yes, a 30 lb propane tank will physically fit inside the Single-Bottle Liquid Propane Gas Rack part # 2020-JR as the 20 lb propane tank that this is made for has the same 12-1/2" diameter as the 30 lb propane tank. The issue will be with the weight of the 30 lb propane tank while full so a better option for you might be the Rack'em Rack for Enclosed Trailers part # RA-1L which is a bit more heavy duty and will also hold your 30 lb propane tank. view full answer...
Whether or not the Camco Propane Supply Hose - ACME Nut x Male Inverted Flare - 60" Long # CAM59193 is going to work for your propane tank is going to be completely based on the connections for your propane tank. The ACME-type 1 fitting is used on your typical propane tank. Flare fittings are typically found on a changeover regulator. I've attached pictures of both of these types of propane fittings for reference below. If you know the connection type on your propane tank and on whatever... view full answer...
The Camco Replacement Propane Supply Hose # CAM59033 referenced in your question features an excess flow soft nose P.O.L. fitting at one end to connect to the propane tank. This will fit any propane tank that has a standard P.O.L. fitting.
The other end of the 5 foot long hose has a 1/4 inch inverted flare male connection that will hook up to your device. view full answer...
Typically a POL fitting will connect to your RV's propane tank and RV regulators normally have a 1/4" NPT inlet so the Propane Tank Connector Fitting - Soft Nose POL x 1/4" Male NPT # 37207-30075 you were already looking at would be the correct adapter fitting. If you have a different fitting type on your regulator or propane tank and can't identify them then please send in some pictures and I can identify them for you.
You are going to want to ensure that the vent on your regulator is... view full answer...
You can hook the MB Sturgis Disposable Propane Bottle Adapter Fitting Item # 204132-MBS to you regulator with type 1 fitting and hook the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10'
Item # 100476-120-MBS to that. This will allow you to have a male quick disconnect attached to your Champion 5500 Dual Fuel Generator. view full answer...
No, propane regulators that take red fittings are high pressure regulators so most green fittings are not going to be rated for use on a high pressure regulator. For example some high pressure regulators satisfy BTU ratings over 1 million BTU/hr and our Camco green propane fitting part # CAM59923 is rated for 200,000 BTU/hr. We do not carry red fittings at this time. view full answer...
There is one option for a propane hose with a Type 1 fitting (the female side that screws onto the propane tank) on one and and a female quick-disconnect on the other end:
- Propane Quick-Disconnect Hose w/ Regulator - Type 1 # 37207-31275
This is a 6' long hose, and does come with the regulator (there isn't an option for a hose with these fittings without the regulator.). view full answer...
The connection type is solely going to depend on the fittings that are on your stove and flat top grill. Most stoves/grills typically have a flare # 204163 or quick disconnect fitting # 104052-401132 so you'll need to see exactly what you have and measure the size as there are multiple sizes for flare fittings.
As for the regulator, it's going to depend on the whether or not the stove/grill already has an internal regulator and if there already a regulator in-between the propane tank(s)... view full answer...
No, the same regulator you would use on a 20lb tank can also be used on a 30lb tank. The factor to consider when choosing your regulator is the BTU and pressure ratings of the regulator so that you can ensure you're meeting the requirements for your appliances.
The Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks # CAM59005 you were looking at can definitely be used with a both a 20lb and 30lb tank. You'll simply need two of the MB Sturgis Propane Hose # 100473-24-MBS.... view full answer...
If you are asking about a cover that will fit over two propane tanks that have plastic thumb screws holding the bracket on the tanks then we have some options depending on the size of your propane tanks.
The Adco RV Propane Tank Cover # 290-2112 for 20 lb. tanks.
The Adco RV Propane Tank Cover # 290-2113 for 30 lb. tanks.
The Adco RV Propane Tank Cover # 290-2114 for 40 lb. tanks.
These covers are for dual tanks and can fit even with a regulator and support bracket installed. If this... view full answer...
Faulkner BBQ Grill # FR51323 has a Female Disposable Cylinder Port connector so you can connect it to a 20-lb propane tank with a Type 1 fitting using MB Sturgis Propane Hose # 100555-144-MBS. This 12-foot hose has the mating male connector on the grille end and the Type 1 on the tank end.
If your tank has a different fitting please send along a picture of the port on the tank and we'll find you the correct hose. You can also refer to the linked article that shows all the different types... view full answer...
The Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks, part # CAM59005 has two 1/4 inch NPT fittings and one 3/8 inch NPT outlet fitting, and will not work with the Camco Propane Hose Assembly, part # CAM59825, but I do have a solution for you.
We have several length Camco Propane Supply Hoses. Each one of these has a 1/4 inch NPT male fitting which can be used with the # CAM59005. The other end of the hose will attach to your propane tank.
The shortest hose... view full answer...
The Camco Replacement Propane Supply Hose # CAM59033 will fit on standard propane tanks. These tank fittings have both inside and outside threads to allow them to connect to both a Type 1 (also called Acme) fitting like the one on your home gas grill and also to a POL fitting such as the one on this hose. view full answer...
Thanks for reaching out!
Usually generators will have their own regulator that connects directly to the propane tanks so if this is the case you just need a kit like the MB Sturgis Sturgi-Stay T-Fitting w/ Hose # 103538-MBS that gives you the connections to 2 propane POL fittings.
If the generator doesn't have it's own regulator then I recommend picking up the JR Products Automatic Changeover 2-Stage Propane Regulator # 37207-30395 and 2 POL pigtails like the 2' part # 37207-30635
The... view full answer...
The extend-a-stay tees just let you connect an external tank to fuel your RV's propane system so that you don't have to pack up and go get the onboard ASME tank refilled. Quick disconnect fittings are totally fine before the regulator and we actually even offer a version that has two quick disconnect fittings on it, part # 103537-MBS. With the ASME tank valve turned on the fittings can be used to fuel propane accessories, and with it off you can then connect an external tank to fuel your... view full answer...
If the 30 lb tank had the ACME style of fitting found on DOT propane tanks the Camco Propane Hose w/ Shut-Off Valve # CAM57629 would fit and work well. This type of fitting is also referred to as Type 1. view full answer...
The Propane Adapter Fitting - 3/8" Female SAE Flare x 1/4" Female NPT #37207-30225, like most propane fittings, is a standard right hand thread fitting. These fittings are typically used on propane regulators to adapt a pigtail hose with a smaller fitting.
The only standard propane fittings that are left hand thread are POL fittings, like part # 204128-MBS. view full answer...
It sounds like you have a POL fitting for your propane and you are wanting to change to a Type 1/ACME propane fitting. You can definitely do this as long as you use the newer propane tanks that have the threads on the outside of the tank valve.
To accomplish this you need the Propane Pigtail # 100575-15-MBS. If your regulator doesn't already have the brass fitting for the inverted flare side you also need the adapter # 402258-MBS. Using the inverted flare fitting means you don't have... view full answer...
Yes, the quick connect fitting of the Camco Propane Hose # CAM57629 is the standard size propane fitting for a propane grill like the part you referenced.
And the threaded portion of this is 1/4 NPT so it would match as well in that regard. view full answer...
To connect your GSI Outdoors Selkirk 540 Camp Stove # GSI53RV to a quick disconnect fitting you would simply need the MB Sturgis Quick Disconnect Propane Hose for Small Appliance # 100476-72-MBS.
The 1"- 20 fitting on the end of this hose will screw onto the regulator that comes with your stove and the male quick disconnect fitting will attach to a female quick disconnect on your propane source.
You can add female quick disconnect to a propane tank by attaching the Camco Propane Fitting... view full answer...
Go To Results